| Three-phase Power Meter BASIC version, DIN 96x96 mm |
| GENERAL DATA |
| Power Supply | 230 Vac / 115 vac (RS485 models) 85..265 Vac, Aux, Cat II (auxiliary powered models) |
| Display | LCD, backlighted, 43x29 mm, 3 rows, 4 digit+symbols |
| Keyboard | 3 front button, 1 protected button |
| Operating temperature | -25..+55°C |
| Sinusoidal vibration amplitude | 50 Hz ± 0.075 mm |
| DMD calculation | DI or window synchronization |
| Memory (instrument with communicatio port) | 8 MB |
| Recordings | AGV values for active and reactive powers |
| THD & Armoniche | Voltage and current THD values
Voltage and current up to 15th |
| Apparent Energy Counters | Total counters or separated inductive/capacitive counters |
| Wiring modes | Three-phase, 4 wires, 3 currents Three-phase, 4 wires, 2 currents (aux models) |
| Front protection degree | IP51 |
| Terminals protection degree | IP20 |
| Measuring termiinal wire diameter | 1,5.. 6 mm2 (modelli con TA) |
| I/O/Supply/COM terminal wire diamater | 1,5.. 35 mm2 (modelli con inserzione 80A) |
| Dimension (lxhxw) | 96x96x39 mm |
| Weight | 436 g |
| ACCURACY |
| Voltage | ±0,2% reading 10% FS...FS (FS=full scale value) |
| Current | ±0,4% reading in 5% FS...FS |
| Power | ±0,5% reading ±0,1% FS (PF=1) |
| Frequency | ±0,1% reading ±1 digit in 45...65 Hz |
| Active Energy | Class 1 according to IEC/EN 62053-21 |
| Reactive Energy | Class 2 according to IEC/EN 62053-23 |
| COMMUNICATION |
| Serial Port | RS485 optoisolated, 300..57.600 bps) |
| Ethernet Port | 10/100 Mbps, RJ45 connector |
| Supported protocols | ModBUS RTU/ASCII (RS485); http, Ntp, Dhcp, ModBUS TCP-IP (Ethernet |
| MEASUREMENT INPUTS |
| Voltage Input | Max voltage: 600 Vac max L-L 20/35 VCA (* VT ratio, using VT) Input impedance: ›1,3 MOhm Frequency: 45 -65 Hz |
| Current Input | Max nominal value: 7 A Starting current (Ist): 2 mA CT load: max 0,15 VA per phase Min FFT calculation value: 100 mA * CT ratio |
| I/O |
| Digital Input | Nr1 optoisolated channel for DMD sinchronization,range 80..265 Vac/dc |
| Digital Output | Nr 2 optoisolated passive channels for alarms/pulses, NPN/PNP, max 27 Vcc - 27 mA, pulse lenght 50 ± 2 ms, output reaction time 1 s |
| Analog Output | Nr 1 optoisolated active channel 0/4..20 mAcc, max load 500 W (model S711E6MODAO) |
| PROGRAMMING |
| Configuration system | Front key buttons
Energy Power Pack software (ModBUS/Ethernet models) Webserver (Ethernet models) |
| STANDARD |
| Certifications | CE |
| Directives | 2006/95/CE, 2004/108/CE |
| Norms | EN 61010-1, EN 61010-2-030, EN 61326-1, EN 55011, EN 61000-4-2, EN61000-4-3, EN61000-4-4, EN61000- 4-5, EN61000-4-6, EN61000-4-11, EN61000-6-2 |
