| Main unit specifications |
| Display (LCD) |
| Size | 7-inch TFT color LCD (WVGA: 800 x 480 dots) |
| Information | Waveform in Y-T with digital values, Enlarged waveforms,Digital values and Real-time statistical result values, XY graph |
| Language | English, French, German, Spanish, Russian, Chinese, Korean, Japanese |
| Interface to PC |
| Type | Ethernet (10 BASE-T/100 BASE-TX), USB2.0 |
| Function | Data transfer to PC (up to 1 ms sampling), Control command to GL980 |
| Ethernet functions | Web server function, FTP server function, NTP client function, DHCP client function, Email send function |
| USB function | USB mode (File transfer and deletion from built-in flash and SD on GL980) |
| Trigger function |
| Trigger action | Start or stop capturing data by triggering |
| Trigger source | Start: Off, Measured signal, Alarm, External, Scheduled time, Scheduled day, Elapsed timeStop: Off, Measured signal, Alarm, External, Scheduled time, Scheduled day, Elapsed time |
| Combination | Level OR, Level AND, Edge OR, Edge AND |
| Threshold | Analog (*1): High or Low in level mode, Rising or Falling in edge mode, Window-in, Window-outLogic: H or L (4-channel signal pattern)Pulse: High or Rising, Low or Falling, Window-in, Window-out |
| Repeat action | Off, On (Re-armed automatically) |
| Trigger hold out | Hold off repeat action in specified periodMode: Previous start to next start, previous stop to next startTime: zero second (no hold off) to 9999 hrs. 59 min. 59 sec |
| Defection accuracy | ± 0.5 % of measurement range |
| Pre-trigger | Up to the number of capturing data points (max. 4000000) specified in built-in RAM (only when built-in RAM is used) |
| Alarm function |
| Alarm action | Displays and outputs a signal when alarm is detected |
| Threshold | Analog input: High, Low, Window-in, Window-outLogic input: H or L (signal in each channel)Pulse input: High or Rising, Low or Falling, Window-in, Window-out |
| Combination | OR (Source channel can be assigned with OR condition to output port) |
| Detection cycle | Link with analog sampling |
| Alarm holding | On or Off |
| Detection accuracy | ± 0.5 % of measurement range |
| Storage deice |
| Built-in RAM | Four million samples for each channelMemory partition: 4 M samples x 1 bank, 2 M sample x 2 banks, 1 M samples x 4 banks, 500 k samples x 8 banksCapturing data points: Specified 10 to 4000000Data type: Captured dataAuto-save: Transfer captured data to other devices after capturing is completed(It can be enabled or disabled) |
| Built-in Flash | 4 GB (for capacity of data: approx. 3.9 GB)Data type: Captured data, Condition settings, Screen copy |
| External USB | Support USB Flash memory device (*3) by USB2.0 Type A port, Single port, No memory capacity limitData type: Captured data, Condition settings, Screen copy |
| External SD CARD | Support SDHC memory card (up to 32 GB) by SD Card slot, Single slotData type: Captured data, Condition settings, Screen copy |
| Capturing mode |
| Mode | Off (Normal), Ring, Relay |
| Off (Normal) | Save data between start to stop |
| Ring | Save most recent data of specified numberDestination: Built-in RAM, Built-in Flash, USB or SDNumber of capturing data: 1000 to 10000000 data (*5)Sampling: up to 1 MS/s (interval 1 µs) in built-in RAM,
up to 1 kS/s (interval 1 ms) with GBD format in other device,
up to 100 S/s (interval 10 ms) with CSV format in other device |
| Relay | Save data to multiple files with specified capturing time or file size (up to 4 GB) until recording data is stoppedDestination: Built-in Flash, USB or SDSampling: up to 1 kS/s (interval 1 ms) with GBD format, up to 100 S/s (interval 10 ms) with CSV format |
| Data backup |
| Interval | Off, 1, 2, 6, 12, 24 hrs., specific time, or any time with key operationSampling: up to 1 kS/s (interval 1 ms) with GBD format, up to 100 S/s (interval 10 ms) with CSV format |
| File destination | Built-in Flash, USB or SD, FTP |
| Data format | GBD (binary) or CSV (test) |
| Hot-swapping external memory | Hot-swapping USB or SD Flash memory with key operation during data backup |
| Search function |
| Function | Search for specific point in captured data |
| Search factor | Analog: Signal levels in each channelLogic: 4-channel signal patternPulse: Rising, Falling, Window-in, Window-out in each channelAlarm: Alarm occurring point |
| Calculation function |
| Statistical | Real-time: Display digital and statistical values at the same timeFunction: Maximum, Minimum, Peak-to-peak (P-P), AverageReplay: Statistical values between cursors in replay captured dataFunction: Maximum, Minimum, Peak-to-peak (P-P), Average, RMS |
| Between channels | Addition, subtraction, multiplication and division for two analog inputs (only in GBD format) |
| Scaling (Engineering unit) function |
| Measured value can be converted to the specified engineering unit | Analog voltage: Converts using four reference points (gain, offset)Temperature: Converts using two reference points (offset)Pulse count: Converts using two reference points (gain) |
| Annotation function | Comment can be set in each channel, up to 31 alphanumeric characters and symbols (Display first 8 characters on screen) |
| Operating environment | 0 to 40 ºC when driven by AC adapter or battery, 5 to 85 % RH (non condensed) |
| Power source |
| AC adapter | 100 to 240 V AC, 50/60 Hz |
| DC power | 8.5 to 24 V DC (required cable option B-514) |
| Battery pack | Two battery packs (option B-569) required |
| Power consumption |
| AC adapter (in 240 V AC) | Approx. 48 VA (66 VA while charging battery) with disabling screen saver
Approx. 43 VA (62 VA while charging battery) with enabling screen saver |
| DC drive (24 V) | Approx. 0.6 A (0.9 A while charging battery) with disable screen saver
Approx. 0.53 A (0.82 A while charging battery) with enabling screen saver |
| DC drive (12 V) | Approx. 1.22 A (Cannot charge battery) with disable screen saver
Approx. 1.07 A (Cannot charge battery) with enabling screen saver |
| DC drive (8.5 V) | Approx. 1.81 A (Cannot charge battery) with disable screen saver
Approx. 1.55 A (Cannot charge battery) with enabling screen saver |
| External dimensions |
| [W×H×D] Approx. | 260 x 161 x 83 mm (with the cover) |
| Weight |
| Approx. | 1.7 kg (the cover is attached, AC adapter and battery are not included) |
| Vibration resistance |
| Compatible with | JIS Vibration test method for automobile Type 1 Class A
(Vibration durability test: 5 m/s²) |
