Technical Specifications |
MEWL |
Supply Voltage: |
10 to 30 VDC Polarity Protected |
Current Requirements: |
45mA (exclusive of load) |
Output Transistors: |
(1) NPN and (1) PNP sensor output transistorSensor outputs can sink or source up to 105mA (current limit)All outputs are continuously short circuit protected. |
Response Time |
Light/Dark state response = 100 microseconds |
Hysteresis: |
Minimal hysteresis promotes detection of low contrast registration marks. |
Light Immunity: |
Responds to sensor's pulsed modulated light soruce resulting in high immunity to most ambient light |
Ambient Temperature: |
-40°C to 70°C (-40°F to158°F) |
Pulse Stretcher Timer: (Selectable) |
Provides minimum of 15 millisecond output duration |
Push-Button Control: |
Automatic setup routines based on web opacityOne push-button setupPushing both buttons simultaneously inverts output |
Indicators: |
Green LED flashes when AUTOSET routine is activated and stays illuinated when AUTOSET is completed.Red LED illuminates when sensor's output transistors are "ON". NOTE: The status of the output transistors can be inverted by pushign both buttons simlutaneously. |
Rugged Construction: |
Chemical resistant high thermoplastic PPS housingWaterproof, NEMA 4 and IP66Conforms to heavy industry grade CE and UL requirements |