Registrador de datos con pantalla

En México:
+52 33 3854 5975
Fuera de México:
+1 619 616 7350

/ GL240

GL240

0 Review(s)

Equipo descontinuado

Verificar información en Chat.

Número de Parte:GL240

Descripción
Comentarios de Clientes
Especificaciones

Descargas

Multimedia

GL240 Registrador de datos con pantalla a color de 4.3", 10 canales, 4GB de memoria y ranura para SD (max 32GB SDHC), resolucion de 16bits, aislamiento por canal (125 VAC RMS y 350 VDC canal a chasis), hasta 110Vp-p entre (+) y (-), incluye fuente de poder

El GL240 es un registrador de datos completo de 10 canales y el líder del mercado de mejor valor. Este registrador de datos compacto y completo acepta señales de voltaje, temperatura, humedad, pulsos y lógicas. El aislamiento de canal a canal significa que los errores de cableado o los canales sobrecargados no afectan a los canales vecinos. Los sensores se conectan a través de terminales de tornillo montados en la parte trasera.

Características:

Compatible con WLAN usando la Unidad WLAN B-568 opcional* para monitoreo remoto y registro de datos
Pantalla LCD a color TFT de 4,3 pulgadas de ancho
Tres tipos de fuente de alimentación: CA, CC*, paquete de batería recargable*
Capacidad de memoria ampliada con tarjetas SD (compatible con SDHC hasta 32 GB*)
Intervalo de muestreo máximo de hasta 10 ms
Todos los canales aislados
Puerto de entrada de señal analógica
Puerto de entrada de señal lógica/pulso
Registrador de datos listo para termopar
Sistema de entrada flexible para señales de voltaje, temperatura, humedad, pulso y lógica
Smartphone, monitoreo de acceso remoto

Aplicaciónes:

Agricultura
Invernadero e hidroponía
Construcción e ingeniería civil
Fabricación de Maquinaria
Industria automotriz
Aeroespacial
Servicios públicos/Gas y electricidad
Aparato eléctrico y equipo de oficina
Procesamiento de alimentos

Main unit specifications
Main unit
Number of analog input channels	10 channels
External input/output
Input	Trigger or Sampling (1 channel), Logic/Pulse (4 channels)
Output	Alarm (4 channels)
Sampling interval	10 ms to 1 hour (10ms to 50ms: voltage only), External signal
Time scale of waveform display	1sec. to 24 hour /division
Trigger, Alarm function
Trigger action	Start or stop capturing data by the trigger
Repeat action	Off, On (auto rearmed)
Trigger source	Start: Off, Measured signal, Alarm, External, Clock, Week or Time Stop: Off, Measured signal, Alarm, External, Clock, Week or Time
Condition Setting	Combination: OR or AND Analog signal: Rising (High), Falling (Low), Window-in, Window-out Logic signal: Pattern (combination of each input signal in high or low) Pulse (number of count): Rising (High), Falling (Low), Window-in, Window-out
Alarm output
Outputs	a signal when alarm condition occurs in the input signal
Pulse input function
Rotation count (RPM)	Counts the number of pulses per sampling interval and converts to rpm (rotations per minute), Number of pulses for one rotation may be set to 50, 500, 5000, 50k, 500k, 5M, 50M, 500M rpm/F.S. (rpm./Full Scale)
Accumulating count	Accumulates the number of pulses from the start of measurement 50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)
Instant count	Counts the number of pulses per sampling interval 50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)
Maximum number of pulse inputs	Maximum input frequency : 50kHz Maximum number of count : 50kC/sampling (16-bit counter)
Calculation function
Between channels	Addition, Subtraction, Multiplication, and Division for analog input
Statistical	Select two calculations from Average, Peak, Maximum, Minimum, RMS
Search function
Search	for analog signal levels, values of logic or pulse or alarm point in captured data
Interface
to PC	USB (Hi-speed), WLAN (using B-568 option)
Storage device
Internal	Built-in 4GB Flash Memory
External	One SD card slot (Support SDHC memory card, up to 32GB)
Saved contents	Captured data, Setting conditions, Screen copy
Back up recording data function
Backup interval	Off, 1, 2, 6, 12, 24 hour(s)
Backup file destination	SD memory card or FTP server
Data format	GBD (binary) or CSV (test)
Check-sum function
OFF	Not adding check-sum code to data file.
ON	Adding check-sum code to data file. Check-sum code is verified when replaying data on the GL unit or GL-Connection software.
Capturing mode
Mode	Normal, Ring, Relay
Ring	Saves most recent data (Number of captured data: 1000 to 2000000 points)
Relay	Saves data to multiple files without losing data until data capturing is stopped
Replay Data
Replays captured data	that was saved in the GL240 (in GBD or CSV format)
Scaling (Engineering unit) function	Measured value can be converted to the specified engineering unit Analog voltage: Converts using four reference points (gain, offset) Temperature: Converts using two reference points (offset) Pulse count: Converts using two reference points (gain)
Action
during data capture	Displaying parst data (using dual display mode (Current + Past data)) Hot-swapping the SD memory card Saving data in between cursors
Display
Size	4.3-inch TFT color LCD (WQVGA: 480 x 272 dots)
Language	English, French, German, Chinese, Korean, Russian, Spanish, Japanese
Information	Waveform in Y-T with digital values, Waveform only, Digital value, Digital values and statistics values
Operating environment	0 to 45 ºC, 5 to 85 % RH (non condensed) (When operating with battery pack 0 to 40 ºC, charging battery 15 to 35 ºC)
Power source
AC adapter	100 to 240 V AC, 50/60 Hz (1 pc of adapter is attached as standard accessory)
DC power	8.5 to 24 V DC (DC drive cable (option B-514) is required)
Battery pack	Mountable battery pack (battery pack (option B-569): 7.2V DC, 2900mAh)
Power consumption	Max. 36 VA
External dimensions (W x D x H in mm, Excluding projections)	Approx.194 x 121 x 46 (with the cover)
Weight	Approx. 634 g (the cover is attached)