| Specifications |
| Digital Input |
| Output Channels |
8 |
| Output Type |
Power Relay, Form A (SPST N.O.) |
| Operating Voltage Range |
250 VAC/30 VDC |
| Max. Load Current |
5.0A/channel at 25 °C |
| Operate Time |
6 ms (Typical) |
| Release Time |
3 ms (Typical) |
| Electrical Life (Resistive Load) |
VDE |
5A 250 VAC 30,000 ops (10 ops/minute) at 75 °C
5A 30 VDC 70,000 ops (10 ops/minute) at 75 °C |
| UL |
5A 250 VAC/30 VDC 6,000 ops.
3A 250 VAC/30 VDC 100,000 ops. |
| Mechanical Life |
20,000,000 ops. at no load (300 ops./minute) |
| System |
| CPU |
16-bit CPU |
| SRAM |
512 KB |
| Flash Memory |
512 KB |
| EEPROM |
16 KB |
| Watchdog |
Yes |
| Communication |
| PoE Ethernet Port |
10 / 100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X |
| 2 Way Isolation |
| I/O |
10 / 100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X |
| EMS Protection |
| ESD (IEC 61000-4-2) |
4 kV Contact for each terminal |
| EFT (IEC 61000-4-4) |
+/-2 kV for Power |
| LED Indicators |
| PoE |
PoE On |
| L1 |
System Running |
| L2 |
Ethernet Link/Act |
| L3 |
Ethernet 10/100M Speed |
| Power Requirements |
| Reserve Polarity Protection |
Yes |
| Powered from terminal block |
Yes, 12 ~ 48 VDC |
| Powered from PoE |
Yes, IEEE 802.3af, Class1 |
| Consumption |
5.3 W |
| Mechanical |
| Dimensions (W x H x D) |
72 mm x 123 mm x 35 mm |
| Installation |
DIN-Rail or Wall mounting |
| Environment |
| Operating Temperature |
-25 ~ +75 °C |
| Storage Temperature |
-30 ~ +80 °C |
| Humidity |
10 ~ 90% RH, non-condensing |
| Software Specifications |
| Functions |
| Rule Configuration Website |
Access Web server on WISE controllers to edit and upload logic rules through web browser. |
| 36 IF-THEN-ELSE Logic Rules |
3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions |
| 48 Internal Registers |
Hold temporary variables and read/write data via Modbus/TCP address. |
| 12 Timers |
Delay / Timing functions. |
| 12 Emails |
Send Email messages to pre-set Email receivers. |
| 12 CGI Commands |
Send pre-set CGI commands. |
| 12 Recipes |
Set up THEN/ELSE action groups. |
| 8 P2P remote modules |
Set up the connection information for the remote WISE modules. |
| Modbus/TCP Protocol |
Real time control and monitoring I/O channels and system status of controllers via SCADA software. |
| IF Conditions |
| Internal Register |
=?>?=?<=(value) |
| DO Counter |
=?>?=?<=(value)?Change |
| Timer |
Timeout?Not Timeout |
| P2P |
DI?AI?DI counter?DO counter?IR |
| Rule Status |
Enable?Disable |
| THEN / ELSE Actions |
| DO Channel |
ON?OFF?Pulse Output |
| Internal Register |
Change the value |
| DO Counter |
Reset |
| Timer |
Start?Stop |
| Email |
Send |
| CGI Commands |
| Recipe |
Execute |
| P2P |
DO(On/Off)?AO?IR |
| Rule Status |
Enable?Disable |
