Inicio/Automatización y control de procesos/PAC/WISE PAC/WISE-580x - Usuario definido E-S y Modulo registrador de datos / WISE-5800

WISE-5800

0 Review(s)

Precio USD*: $693.64

Sobre Pedido (10~12 días hábiles)

Número de Parte:WISE-5800

Cantidad

Descuento por volumen

Cantidad

Precio USD

3 - 4
$679.77
5 - 9
$665.89
10 - 24
$645.09
25 - 49
$617.34
50 - 99
$610.40
100+
$596.53

Descripción
Comentarios de Clientes
Especificaciones

Accesorios Recomendados

User-defined I/O & Data Logger Module Communicable over Modbus TCP. Supports 1 XW I/O expansion board inside and up to 16 RS-485 based I-7000 modules or Modbus RTU devices. MiniOS7 Operating System.

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-5800 supports an I/O expansion bus to implement various I/O functions such as D/I, D/O, A/D and D/A according to the XW-Board. In addition, WISE-5800 also support ICP DAS I-7000 remote I/O modules. Based on the variety I/O module of I-7000, WISE-5800 can provide user more flexibility in application field.

WISE-5800 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It include all advantages which WISE series controllers can provide. In addition, WISE-5800 provide data logger function with microSD card, it can record I/O channel value by event trigger or regular time period. The data files can be sent back by Email or FTP. All setting can be completed through browser.

Features:

Built-in Web Server for IF-THEN-ELSE rule setting
Built-in IF-THEN-ELSE rule enigne for logic operation
Support IO, Counter, Timer, Schedule, Email, Recipe operations
No more programming. Just click and get done!
Data logger and data files send back function supported
Modbus TCP Protocol for SCADA Software Seamless Integration
10/100 Base-TX Ethernet
Support XW-Board
Support I-7000 Remote I/O Modules(Up to 16)
SNTP Time Synchronization Supported

Specifications
CPU Module
CPU	16-bit CPU
SRAM	768 KB
Flash	512 KB
EEPROM	16 KB
NVRAM	31 Bytes
microSD Expansion	Support 1/2/4 GB microSD
RTC (Real Time Clock)	RTC Provide seconds, minutes, hours, date of week/month; month and year
Watchdog Timers	Yes (0.8 second)
Communication Ports
Ethernet	RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
COM 1	RS-232 (Reserved, Unsupported by WISE firmware)
COM 2	RS-485 (D2+, D2-), self-tuner ASIC inside, non-isolated, Speed : 115200 bps max.
LED Indicators
System LED	Yes (Red)
Ethernet Link LED	Yes (Green : Ethernet link detected, Flashing Green : Ethernet packet received)
LED Display	-
Hardware Expansion
I/O Expansion Bus	Yes
Mechanical
Dimensions (W x H x D)	91 mm x 123 mm x 52 mm
Installation	DIN-Rail
Environment
Operating Temperature	-25 to 75 °C
Storage Temperature	-40 to 80 °C
Ambient Relative Humidity	5 to 95% RH, non-condensing
Power
Protection	Power reverse polarity protection.
Frame Ground	Yes (for ESD Protection).
Input Range	+12 ~ +48 VDC
Redundant Power Input	Yes
Power Consumption	2.0 W
Software Specifications
Functions
Rule Configuration Website	Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules	3 IF conditions with AND or OR operators
36 IF-THEN-ELSE Logic Rules	3 THEN actions and 3 ELSE actions
48 Internal Registers	Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers	Delay / Timing functions.
12 Schedules	Setup prescheduled routine tasks.
12 Emails	Send Email messages to pre-set Email receivers.
12 CGI Commands	Send pre-set CGI commands.
12 Recipes	Set up THEN/ELSE action groups.
Data Logger	Set up the Data Logger configuration, include the data record format, and data file sending operation.
Modbus/TCP Protocol	Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
DI Channel	ON, OFF, ON to OFF, OFF to ON, Change
AI Channel	=, >, <, >=, <=(value)
Internal Register	=, >, <, >=, <=(value)
DI Counter	=, >, <, >=, <=(value), Change
Timer	Timeout, Not Timeout.
Schedule	In Range, Out of Range
Rule Status	Enable, Disable
THEN / ELSE Actions
DO Channel	ON, OFF, Pulse Output (Just for XW-Board)
AO Channel	Change the value
Internal Register	Change the value
DI Counter	Reset
Timer	Start, Reset
Schedule	Enable, Disable
Email	Send
CGI Commands	Send
Recipe	Execute
Data Logger	Start, Stop, One-Time Log
Rule Status	Enable, Disable