Technical Specifications |
Operation Mode | Class 1 I/O Scanner |
SUPPLY VOLTAGE | • 10 to 30 VDC • Polarity Protected |
TRANSISTOR OUTPUT | • (1) NPN and (1) PNP output transistor: NPN: Sink up to 150 mA PNP: Source up to 150 mA ,br> • Continuous short circuit protected • Outputs protected from pulsing during power up |
ANALOG OUTPUT | • 4 – 20 mA (Consult factory for specifications) |
Micro Polished | Fiberoptic Light Guide |
BF-U-36TUV | 0.156" Bundle Size (4.0 mm) |
Usable Range | Up to 2.5" (63.5 mm) |
Response Time | 350 microseconds |
RESPONSE TIME | • Varies by sensor model |
AMBIENT TEMPERATURE | • - 15°C to +70°C (5°F to 158°F) |
LIGHT IMMUNITY | • Responds to sensors pulse modulated light source,resulting in high immunity to most ambient light and strobes, including indirect sunlight |
RUGGED CONSTRUCTION | • Chemical resistant, high impact polycarbonate housing, standard acrylic or optional glass window ,br> • Industry Ratings: NEMA 4, IP67 |
PUSH BUTTON CONTROL | • One-Touch AUTOSETTM push-button setup • Tweak adjustments with up or down buttons • Selection of Light/Dark operation • Enable/Disable pulse stretcher |
HYSTERESIS | • 2 bars as displayed on Contrast Indicator: Light State switch : 5 Dark State Switch : 3 |
DIAGNOSTIC INDICATORS | • Contrast Indicator ,Display scaled reading of sensors response to contrasting light levels (Light vs. Dark) on an 8 bar LED display |
RED LED OUTPUT INDICATOR | Illuminates when the sensors output transistors are ON NOTE: If Output LED flashes, a short circuit condition exists • GREEN LED TIMER INDICATOR Illuminates when the 15 millisecond pulse stretcher timer is enabled |
LIGHT SOURCE | • UV LED, 375 nm Wavelength |