Technical specifications |
MODEL SPECIFIC |
Adjustment Type | Knob |
Connection Type | Connector, 4-pin M12 |
Housing Type | Rectangular |
Optical Block | Type O1G, Glass, Medium to Long Range Proximity Adapts the sensor to the optical proximity mode of sensing. |
LED Light Source | Infrared = 880 nm |
Sensing Range | 6 ft |
FAMILY SPECIFIC |
Supply Voltage | 12 to 24 VDC Polarity Protected |
Current Requirements | 85mA (exclusive of load) |
Output Transistors | - (1) NPN and (1) PNP sensor output transistor
- NPN Sink up to 150mA
- PNP Source up to 150mA
- Momentary short circuit protected
- Outputs protected from pulsing during power up
- Light/dark switch determines output status
Light = Light "ON" operate Dark = Dark "ON" operate |
Response Time | - Minimum duration of input event
- Light state response = 50 microseconds
- Dark state response = 140 microseconds
- Leading edge variation less than 20 microseconds
|
Hysteresis | Less than 400 millivolts for maximum sensitivity and resolution |
Indicators | - OUTPUT INDICATOR: Red LED illuminates and the NPN or PNP outputs switch to the opposite state when retunred light level exceed "5" on the CONTRAST INDICATOR
- EDR® INDICATOR - Intensity of GREEN LED provides indication of where in the dynamic operating range the offset, EDR® adjustment has been set
- FULLY LlT: Operating near saturation
- OFF: Operating near maximum sensing range
- CONTRAST INDICATOR Displays scaled reading of sensor's response to contrasting light levels (light vs. dark) on a ten bar LED display
|
Light Immunity | Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light, including high intensity strobes |
Ambient Temperature | -40°C to 70°C (-40°F to158°F) |
Rugged Construction | - Chemical resistant, high-impact polycarbonate housing
- Waterproof, NEMA 4X, 6P and IP67 enclosure ratings
- Epoxy encapsulated for mechanical strength
|