Specifications |
Model Specific |
Adjustment Type | Knob |
Connection Type | Connector, 4-pin M12 |
Housing Type | Rectangular |
Optical Block | Type V1, Focused Lens "V" Axis Direct lens “V” axis sensing at close ranges. Used for small part or precise leading edge sensing. |
LED Light Source | Blue = 480nm Useful for detecting translucent, transparent, plastic, or glass objects in the retroreflective mode when using the R4 optical block. Used as blue filter for color perception advantages, i.e. resolving yellow vs. white colored objects or printed registration marks. |
Sensing Range | 2.25in. |
Family Specific |
Supply Voltage | 12 to 24 VDC Polarity Protected |
Current Requirements | 85mA (exclusive of load) |
Output Transistors | (1) NPN and (1) PNP sensor output transistor NPN Sink up to 150mA PNP Source up to 150mA Momentary short circuit protected Outputs protected from pulsing during power up Light/dark switch de4termines output status Light=Light "ON" operate Dark=Dark "ON" operate |
Response Time | Minimum duration of input event Light state response=50 microseconds Dark state response=140 microseconds Leading edge variation less than 20 microseconds |
Hysteresis | Less than 400 millivolts for maximum sensitivity and resolution |
Indicators | - OUTPUT INDICATOR: Red LED illuminates and the NPN or PNP outputs switch to the opposite state when retunred light level exceed "5" on the CONTRAST INDICATOR
- EDR® INDICATOR - Intensity of GREEN LED provides indication of where in the dynamic operating range the offset, EDR® adjustment has been set
- FULLY LlT: Operating near saturation
- OFF: Operating near maximum sensing range
- CONTRAST INDICATOR – Displays scaled reading of sensor's response to contrasting light levels (light vs. dark) on a ten bar LED display
|
Light Immunity | Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light, including high intensity strobes |
Ambient Temperature | -40°C to 70°C (-40°F to158°F) |
Rugged Construction | Chemical resistant, high-impact polycarbonate housing Waterproof, NEMA 4X, 6P and IP67 enclosure ratings Epoxy encapsulated for mechanical strength |