| GENERAL SPECIFICATIONS |
| GENERAL DATA |
| Power Supply | 9-32 Vdc with limited power source; 3,3-4,8 Vdc with battery supply |
| External module supply | Yes |
| Rx Consumption | Approx 30 mA |
| Tx Consumption | Max 600 mA |
| DTR OFF Consumption | < 10µA |
| Hot swapping | no |
| Status indicators | ONAIR / On / Data / I/O |
| Operating bandwidth | 169.400 - 169.475 MHz |
| Channels number | 3 @ CH 25 kHz , 6 @ CH 12.5 kHz – European D. 2005/928/CE |
| Canalization | 12.5 kHz or 25 kHz |
| Modulation | 9K00F1D or 18K0F1D (NBFM / GFSK) |
| Data rate (radio) | 4,800 bps @ 12.5 kHz – 9,600 bps @ 25 kHz |
| Frequency stability | ±500 Hz |
| Operating Mode | Point-to-point, point-to-multipoint, broadcasting, Modbus (master/slave), Mesh support (static) |
| Crypting | AES 128 bit |
| RTC | Embedded for custom applications |
| Antenna | Vertical stilo ?1/2 / ?1/4 / 3-elements Yagi |
| Connectors | Removable screw terminal |
| Dimension | 140 x 110 x 50 mm |
| Operating Temperature | -30..70°C |
| Weight | 330 g |
| Protection degree | IP20 |
| Mounting | Wall mounting |
| Aux Digital Output | nr. 2 N.O. 28 Vac @ 0,5 A or 60 Vdc @ 1 A |
| Digital Inout | nr. 4 PNP 0-12 Vdc + 1 counter 10Hz |
| Built-in I/O | 4DI, 2DO (relè), 1 counter 2AO (4-20 mA), 2 AI (4-20 mA) |
| TRANSMITTER |
| Output power | 500 mWERP |
| Frequency deviation | ± 1.8 kHz @ 12,5 kHz - ± 3.6 kHz @ 25 kHz |
| Output power stability | ±1.5 dB |
| Power on adjacent channel | Compliant to EN 300 220-1 v.2.3.1 |
| Power transitory on adjacent channel | Compliant to EN 300 220-1 v.2.3.1 |
| RECEIVER CLASS 1/2 - LBT - AGILITY |
| Type | CLASS 1 - LBT - AGILITY |
| Sensitivity | <-110 dBm @ 9.600 bps |
| Attenuation adjacent channel and blocking | Compliant to EN 300 220-1 v.2.3.1 |
| COMMUNICATION |
| Interface | RS485 |
| Data rate | From 2.400 to 57.400 bps |
| SETTING & FUNCTIONS |
| Software | RTURADIO-SETUP |
| Typical application | Meter Reading, Tackineg & Tracing, Telemetering & Commands |
| STANDARD |
| Marks | CE |
| Norms | EN 300 220-1 v2.3.1 , EN 300 220-2 v2.3.1 |