Technical specifications |
MODEL SPECIFIC |
Adjustment Type | Push Button |
Connection Type | Connector, 5 pin M12 pigtail |
Housing Type | Rectangular |
FAMILY SPECIFIC |
Supply Voltage | 10 to 30 VDC Polarity Protected |
Current Requirements | 50mA (exclusive of load) |
Output Transistors | - (1) NPN and (1) PNP sensor output transistor:
- NPN: Sink up to 150mA
- PNP: Source up to 150mA
- Continuous short-circuit protection
- Outputs protected from pulsing during power up
|
Remote AUTOSET Input | Opto-isolated momentary sinking input (10mA) |
Response Time | Light State = 100 microseconds Dark State = 100 microseconds |
LED Light Source | Red 660nm Pulse modulated |
Push Button Control | - "One-Touch" AUTOSET pushbutton setup
- Tweak adjustments with "up" or "down" buttons
- LST (Light State Tracking) Enable/Disable
- Light "ON"/Dark "ON" Selection
|
Range | Optimum from 6in. to 8ft. (15.24cm to 2.4m) distance to the AR6151 reflector |
Hysteresis | Two bars as displayed on Contrast Indicator Light State Switch = 5 Dark State Switch = 3 |
Diagnostic Indicators | - Contrast Indicator - Display scaled reading of sensor's response to contrasting light levels (light vs. dark) on an 8-bar LED display
- Red LED Indicator - LOCK
- Green LED Indicator - LST (Light State Tracking)
- Red LED Indicator - OUTPUT
|
Light Immunity | Responds to sensor's pulse-modulated light source, resulting in high immunity to most ambient light, including high intensity strobes |
Ambient Temperature | -40°C to 70°C (-40°F to 158°F) |
Rugged Construction | - Chemical resistant, high-impact polycarbonate housing
- Waterproof ratings: NEMA 6 and IP67
|