| Technical specifications |
| Analog input |
| A/D converter type | Successive approximation |
| Maximum sample rate | 500 kS/s single channel, 250 kS/s multi-channel |
| Resolution | 12 bits, 1-in-4096 |
| Number of channels | 16 single ended / 8 differential, Software selectable |
| Input ranges | Bipolar: ±10 V, ±5 V, ±2.5 V, ±1 V, ±0.5 V, ±0.25 V, ±0.1 V, ±0.05 V,
Unipolar: 0 to 10 V, 0 to 5 V, 0 to 2 V, 0 to 1 V, 0 to 0.5 V, 0 to 0.2 V, 0 to 0.1 V
Software selectable |
| A/D pacing (SW programmable) | Internal counter –ASIC. Software selectable time base: - Internal 40 MHz, 50 ppm stability
- External Source via AUXIN<5:0>, Software selectable.
External convert strobe: A/D CONVERT
Software paced |
| Burst mode | Software selectable option, burst rate =4µS |
| A/D gate sources | External digital: A/D GATE
External analog: ATRIG inputCH0 IN through CH15 IN |
| A/D gating modes | External digital: Programmable, active high or active low, level or edge
External analog: Refer to Analog Triggeron. |
| A/D trigger sources | External digital: A/D START TRIGGER
A/D STOP TRIGGER
External analog: ATRIG input. CH0 IN through CH15 IN |
| A/D triggering modes | External digital: Software-configurable for rising or falling edge.
External analog: Refer toAnalog Triggeron page 8.
Pre-/Post-trigger: Unlimited number of pre-trigger samples, 16 Meg post-trigger samples. |
| ADC pacer out | Available at user connector: A/D PACER OUT |
| RAM buffer size | 8 K samples |
| Data transfer | DMA
Programmed I/O |
| DMA modes | Demand or non-demand using scatter gather. |
| Configuration memory | Up to 8 K elements. Programmable channel, gain, and offset |
| Streaming-to-disk rate | 500 kS/s, system dependent |
