Specifications |
Technology |
Standards | IEEE802.3, 802.3u, 802.3x |
Processing Type | Store & forward wire speed switching - no delays |
MAC addresses supported | 1024 |
Memory Bandwidth | 3.2 Gbps |
Flow Control | IEEE802.3x flow control, back pressure flow control |
Interface |
RJ45 port | 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection |
Fiber Optics Port | 100 Base-FX(Multi-mode; ST connector) |
LED Indicators | 10/100M, Link/Act/Backup, Full duplex/Half duplex(Fiber Port) |
Ethernet Isolation | 1500 Vrms 1 minute |
Frame Ground for EMS Protection | Yes |
Fiber Optic Transmission distance | Multi mode fiber cables:50/125, 62.5/125 or 100/140 µm Distance :2 km, (62.5/125 µ recommended) for full duplex Wavelength : 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14 dBm RX Sensitivity: -34 to -31 dBm |
Ethernet Transmission distance | Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm |
Power |
Redundant Input Range | +10 ~ +30VDC (Non-isolation) |
Alarm Contact | One relay output with current carrying capacity of 2A @ 30 VDC |
Power consumption | 0.17A@24VDC, +/- 5% arrowed with 100M Full duplex |
LED Indicator | Power input1, Power input2, Power fail |
Protection | Power reverse polarity protection |
Frame Ground for EMS Protection | Yes |
Connection | 7-Pin Removable Terminal Block |
Mechanical |
Case | Metal |
Environmental rating | IP20 |
Dimensions | 72.5mm x 110mm x 102mm (W x H x D) |
Installation | DIN rail mount; Wall Mounting |
Environmental |
Operating temperature | 0 °C~ +70°C |
Storage Temperature | -20 ~ +85°C |
Relative Humidity | 10% to 90% non-condensing |