| Specifications |
| Technology |
| Standards | IEEE802.3, 802.3u, 802.3x |
| Processing Type | Store & forward wire speed switching - no delays |
| MAC Addresses | 1024 |
| Memory Bandwidth | 3.2 Gbps |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
| Interface |
| RJ45 port | 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection |
| Fiber Optic port | 100 Base-FX(Single-mode; SC connector) |
| LED Indicators | 10/100M, Link/Act, Full duplex/Half duplex(Fiber Port) |
| Ethernet Isolation | 1500 Vrms 1 minute |
| Frame Ground for EMS Protection | Yes |
| Fiber Optic | Single-mode fiber cables:8.3/125, 8.7/125, 9/125 or 10/125 µm
Distance :15 km, (9/125 µm recommended) for full duplex
Wavelength : 1300 or 1310nm
Min. TX Output:- 15 dBm
Max. TX Output: -8 dBm
RX Sensitivity: -36 to -31 dBm |
| Ethernet Transmission distance | Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm |
| Power |
| Redundant Input Range | +10 ~ +30VDC (Non-isolation) |
| Alarm Contact | One relay output with current carrying capacity of 2A @ 30 VDC |
| Power consumption | 0.17A@24VDC, +/- 5% arrowed with 100M Full duplex |
| LED Indicators | Power input1, Power input2, Power fail |
| Protection | Power reverse polarity protection |
| Frame Ground for EMS Protection | Yes |
| Connection | 7-Pin Removable Terminal Block |
| Mechanical |
| Case | Metal |
| Environmental rating | IP20 |
| Dimensions | 72.5mm x 110mm x 102mm (W x H x D) |
| Installation | DIN rail mount; Wall Mounting |
| Environmental |
| Operating Temperature | 0 ~ +70°C |
| Storage Temperature | -20 ~ +85°C |
| Ambient Relative Humidity | 10% to 90% non-condensing |
