Switch industrial NSM-206AFT-T

En México:
+52 33 3854 5975
Fuera de México:
+1 619 616 7350

Inicio/PC's y Comunicaciones Industriales/Switch ethernet/Switch ethernet con PoE/Hasta 5 puertos / NSM-206AFT-T

NSM-206AFT-T

0 Review(s)

Precio USD*: $714.68

Sin inventario, favor de confirmar tiempo de embarque

Número de Parte:NSM-206AFT-T

Cantidad

Descuento por volumen

Cantidad

Precio USD

3 - 4
$700.39
5 - 9
$686.09
10 - 24
$664.65
25 - 49
$636.07
50 - 99
$628.92
100+
$614.62

Descripción
Comentarios de Clientes
Especificaciones

Multi-mode, ST Connector, 4-Port 10/100 Mbps with 2 Fiber ports Switch, metal case, Supports Input Voltage Range of 12 – 48VDC, has an FT connector, operate up to 75C.

The NS-206AF/NSM-206AF is a 4-port unmanaged Ethernet with 2 fi ber port switch. Using fi ber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions. The NS-206AF/NSM-206AF provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

Features:

Provides 6 x 100-FX fi ber port plus 4 x Ethernet ports.
Each port supports both 10/100 Mbps speed auto negotiation.
Full duplex IEEE 802.3x and half duplex backpressure flow control.
DIN-Rail.
Automatic MDI/MDI-X crossover for plug-and-play.
Store-and-forward architecture.
Redundant dual +12 ~ 48 VDC power inputs.
Supports operating temperatures from -30 ~ +75°C.

Specifications
Technology
Standards	IEEE 802.3, 802.3u, 802.3x
Processing Type	Store & forward; wire speed switching
MAC Addresses	1024
Memory Bandwidth	2.0 Gbps
Frame Buffer Memory	512 Kbit
Flow Control	IEEE 802.3x flow control, back pressure flow control
Ethernet Interface
RJ-45 Ports	10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators	Power, Link/Act, 10/100M
Ethernet Isolation	1500 Vrms 1 minute
+/- 4 kV ESD Protection	Yes
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode	Multi mode fiber cables: 50/125, 62.5/125 or 100/140 um Distance: 2 km, (62.5/125 um recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: - 20 dBm Max. TX Output: - 14 dBm Max. RX Sensitivity: -32 dBm Max. RX Overload: -8 dBm Budget: 12 dBm
Power Input
Input Voltage Range	+12 ~ +48 Vdc (Redundant input)
Power consumption	0.14 A@ 24 Vdc
Protection	Power reverse polarity protection
+/-4 kV ESD Protection	Yes
Connection	6-Pin Removable Terminal Block
Mechanical
Casing	Metal (IP30 Protection)
Dimensions (W x L x H)	25 mm x 168 mm x 119 mm
Installation	DIN-Rail
Environmental
Operating Temperature	-30°C ~ +75°C
Storage Temperature	-40°C ~ +85°C
Ambient Relative Humidity	10% ~ 90% RH, non-condensing