Switch industrial NSM-205PFCS

En México:
+52 33 3854 5975
Fuera de México:
+1 619 616 7350

Inicio/PC's y Comunicaciones Industriales/Switch ethernet/Switch ethernet con PoE/Hasta 5 puertos / NSM-205PFCS

NSM-205PFCS

0 Review(s)

Precio USD*: $984.88

Sin inventario, favor de confirmar tiempo de embarque

Número de Parte:NSM-205PFCS

Cantidad

Descuento por volumen

Cantidad

Precio USD

3 - 4
$965.18
5 - 9
$945.48
10 - 24
$915.94
25 - 49
$876.54
50 - 99
$866.69
100+
$847.00

Descripción
Comentarios de Clientes
Especificaciones

Single-mode 30 Km, SC Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case

The NS-205PFx/NSM-205PFx is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PFx/NSM-205PFx makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and highdistance (up to 60 km) transmissions.

Features:

Provides 1 x 100-FX fiber port plus 4 x PoE ports
Automatic MDI/MDI-X crossover for plug-and-play
Each port supports both 10/100Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
4 PoE ports with Power Sourcing Equipment (PSE) operation
Auto-detection of PD (powered devices) and automatic power management
Over-temperature, over-current and over/under-voltage detection
Power Input, +46 ~ +55 VDC
Supports operating temperatures from –30 ~ +75°C
DIN-Rail

Specifications
Models	NSM-205PFx series
Technology
Standards	IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type	Store & forward, wire speed switching
MAC Addresses	1024
Memory Bandwidth	3.2 Gbps
Frame Buffer Memory	512 Kbit
Flow Control	IEEE802.3x flow control, back pressure flow control
Interface
RJ-45 Ports	10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators	Power, Link/Act , 10/100M, Power Device is detected
Ethernet Isolation	1500 Vrms 1 minute
+/-6 kV EMS Protection	Yes
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode (NS-205PFT/FC)	Multi mode fiber cables:50/125, 62.5/125 or 100/140 µm
	Distance :2 km, (62.5/125 µm recommended) for full duplex
	Wavelength : 1300 or 1310nm
	Min. TX Output:- 20 dBm
	Max. TX Output: -14 dBm
	Max. RX Sensitivity: -32 dBm
	Max. RX Overload: -8 dBm
	Budget: 12 dBm
Single-Mode (NS-205PFCS)	Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125µm
	Distance: 30 Km, (9/125 µm recommended) for full duplex
	Wavelength: 1300 or 1310nm
	Min. TX Output: - 15 dBm
	Max. TX Output: -8 dBm
	Max. RX Sensitivity: -34 dBm
	Max. RX Overload: -5 dBm
	Budget: 19 dBm
Single-Mode (NS-205PFCS-60)	Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125µm
	Distance: 60 Km, (9/125 µm recommended) for full duplex
	Wavelength: 1300 or 1310nm
	Min. TX Output: - 5 dBm
	Max. TX Output: 0 dBm
	Max. RX Sensitivity: -35 dBm
	Max. RX Overload: -5 dBm
	Budget: 30 dBm
Power Input
Input Voltage Range	+46 ~ +55 VDC for PoE output
Power Consumption	0.08@ 48 VDC without PD loading
Protection	Power reverse polarity protection
Frame Ground for EMS Protection	Yes
Connection	3-Pin Removable Terminal Block
PoE Output
PoE Compliance	100% IEEE 802.3af compliant
PoE Classification	PSE (Power Sourcing Equipment)
PoE Voltage	+48 VDC depending on power input
PoE Power	Up to 15.4 watts per channel
PoE Operation	Automatic detection and power management
Mechanical
Casing	Metal (IP30 Protection)
Dimensions (W x L x H)	25 mm x 168 mm x 119 mm
Installation	DIN-Rail
Environment
Operating Temperature	-30°C ~ +75°C
Storage Temperature	-40°C ~ +85°C
Humidity	10% to 90% RH, non-condensing