Technical Features
|
Model Specific
|
| Adjustment Type: |
Potentiometer |
| Connection Type: |
Cabled, 6ft |
| Housing Type: |
18MM |
| Output Transistors: |
- NPN: Sink up to 100mA
- All outputs are continuously short circuit protected
|
| Supply Voltage: |
- 10 to 30 VDC
- Polarity Protected
|
| Family Specific |
| Current Requirements: |
30mA (exclusive of load) |
| Remote AUTOSET Input: |
Opto-isolated momentary sinking input (10 milliamps) |
| Response Time |
- Light State response = 600µs (1,100µs, Thru-Beam)
- Dark State response = 600µs (1,100µs, Thru-Beam)
|
| Light/Dark "ON" Operation: |
- Light “ON” achieved by connecting white wire to negative lead
- Dark “ON” achieved by connecting white wire to positive lead
|
| Range: |
Dependent on model, see Selection Guidelines Note: 5 VDC models, range reduced by
10% |
| Hysteresis: |
Approximately 20% of signal |
| Light Immunity: |
Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light,
including high intensity strobes |
| Diagnostic Indicators: |
- Red LED = Output Status
- Green LED = Power “ON”
|
| Ambient Temperature: |
-40°C to 70°C (-40°F to 158°F) |
| Rugged Construction: |
- Chemical resistant, high-impact polycarbonate housing
- Waterproof ratings: NEMA 4X, IP66
|
