M-7018Z

0 Review(s)

En Venta ~~$586.80~~ $504.65 USD
*Los precios son en Dolares y no incluyen IVA

Stock: 0

Sobre Pedido

Número de Parte:M-7018Z

Cantidad

Descuento por volumen

Cantidad

Precio

3 - 4
$499.60
5 - 9
$494.56
10 - 24
$484.46
25 - 49
$479.42
50 - 99
$474.37
100+
$469.32

Descripción
Comentarios de Clientes
Especificaciones

Familias Relacionadas

Accesorios Recomendados

Modulo DAQ con 10 entrada analogicas, Admite entrada mV, V, mA y termopares, Interface RS-485, Soporta protocolos Modbus RTU y DCON (Configurable por software), Incluye placa auxiliar DB-1820. Montaje en Riel DIN, Requiere alimentacion 10 a 30 Vdc

The M-7018Z is a 10-channel voltage and current thermocouple input data acquisition module. It is communicable over Modbus RTU and RS-485 with High Over Voltage Protection. Supports operating temperatures between -25 to 75°C (-13F ~ 167F). M-7018Z comes with a DB-1820 Daugther Board that supports Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA software and PLCs.

Features:

10-channel Analog Input
Temperature Output Consistency
Stable Temperature Output in the Field
Current, Voltage and Thermocouple Input
Overvoltage Protection of up to 240 Vrms
Individual Channel Configuration
Open Thermocouple Detection
4 kV ESD Protection
3000 VDC Intra-module Isolation
Dual Watchdog
Wide Operating Temperature Range: -25 to +75°C

System Specifications
Analog Input
Input Channels	10 Differential
Input Type	+/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V +/-20mA, 0~20mA, 4~20mA (Requires Optional External 125 Ohm Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710)
Resolution	16-bit
Sampling Rate	10 Samples/Sec (Total)
Accuracy	+/- 0.1 %
-3dB BandWidth	15.7 Hz
Zero Drift	+/- 0.5 µV/°C
Span Drift	+/- 25 ppm/°C
Common Mode Rejection	150 dB
Normal Mode Rejection	100 dB
Input Impedance	>500k Ohms
Over voltage Protection	240 Vrms
Open Thermocouple Detection	Yes
Individual Channel Configuration	Yes/td>
Intra-module Isolation, Field to Logic	3000Vdc
Interface
Interface	RS-485
Format	N, 8, 1
DB-1820 (3.81mm pitch)
Wire Strip Length	4 ~ 5 mm
Wire Range	16 ~ 24 AWG
DN-1822 (5.08mm ptich)
Wire Strip Length	4 ~ 5 mm
Wire Range	14 ~ 24 AWG
LED Display
1 LED as Power/Communication Indicator
Power
Input	+10 ~ +30 VDC
Power Consumption	1.0W
Protocol
Support Modbus and DCON Protocol	Yes
Environment
Operating Temperature	-25 ~ 75 °C
Storage Temperature	-40 ~ 85 °C
Humidity	5 ~ 95% RH, Non-condensing