| Technical Specifications |
| LERRC10-M12 |
| Supply Voltage: |
10 to 30 VDCPolarity Protected |
| Current Requirements: |
45mA (exclusive of load) |
| Output Transistors: |
(1) NPN and (1) PNP sensor output transistorSensor outputs can sink or source up to 150mA (current limited)All outputs are continuously short circuit protected |
| Response Time: |
10 microseconds response time5 microseconds repeatability |
| Hysteresis: |
Minimal hysteresis promotes the detection between the backing material and the label depending on the settings. |
| Pushbutton Control: |
AUTOSET - One-push button setupLT/DK - Push and Hold to change output Light On/Dark OnUp/Dwn - Tweak-able Up/Down Adjustment |
| LED Light Source: |
High intensity red LEDPulse modulated |
| Indicators: |
Green LED flashes when AUTOSET routine is activated and stays illuminated when AUTOSET is completed.Red LED illuminates when sensor's output transistors are "ON". |
| Light Immunity: |
Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light. |
| Ambient Temperature: |
-40°C to 70°C (-40°F to 158°F) |
| Rugged Construction: |
Chemical resistant, high thermoplastic PPS housingWaterproof ratings: NEMA 4 and IP66Conforms to heavy industry grade CE and UL requirements |
