| GENERAL SPECIFICATIONS |
| CAN Interface |
| Controller | NXP SJA1000T with 16 MHz clock
Microprocessor inside with 20MHz |
| Transceiver | NXP 82C250 |
| Channel number | 1 |
| Connector | 5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others) |
| Baud Rate (bps) | 10k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1000 k |
| Transmission Distance (m) | Depend on baud rate (for example, max. 1000 m at 50 kbps ) |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminator Resistor | Switch for 120 O terminator resistor |
| Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
| Protocol | CANopen DS-301 ver4.02 |
| Hardware |
| CPU | 80186, 80 MHz or compatible |
| SRAM/Flash/EEPROM | 512 KB / 512 KB / 16 KB |
| NVRAM | 31 bytes (battery backup, data valid for up to 10 years) |
| RTC (Real Time Clock) | Yes |
| Watchdog | CPU built-in |
| LED |
| Round LED | PWR LED, Rx/Tx LED, ERR LED |
| Software |
| Driver | Windows CE5, Windows CE6 |
| Library | For CE5: VB.Net, C#.Net, VC 2005 (with .Net Framework 2.0 or upper), and eVC++ 4.0
For CE6: VB.Net, C#.Net, VC 2008 (with .Net Framework 3.5 or upper) |
| Power |
| Power Consumption | 2 W |
| Mechanism |
| Dimensions | 31mm x 115mm x 91mm (W x L x H) |
| Environment |
| Operating Temp. | -25 ~ 75°C |
| Storage Temp. | -40 ~ 80°C |
| Humidity | 5 ~ 95% RH, non-condensing |
