| Specifications |
| Hardware |
| CPU | 80186, 40 MHz or compatible |
| SRAM/Flash/EEPROM | 512 KB / 512 KB / 2 KB |
| NVRAM | 31 bytes (battery backup, data valid for up to 10 years) |
| RTC (Real Time Clock) | Yes |
| Watchdog | CPU built-in |
| Hardware Serial No. | 64-bit hardware serial No. |
| ESD Protection | 4 kV class A |
| CAN Interface |
| Controller | NXP SJA1000T with 16 MHz clock |
| Transceiver | NXP 82C250 |
| Channel number | 1 |
| Connector | 5-pin screwed terminal block (CAN_L, CAN_H, N/A for others) |
| Baud Rate (bps) | 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate) |
| Specific | ISO-11898-2, CAN 2.0A and CAN 2.0B |
| Transmission Distance (m) | Depend on baud rate (for example, max. 1000 m at 50 kbps ) |
| Isolation | 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminator Resistor | Jumper for 120 ? terminator resistor |
| UART Interface |
| COM 1 | RS-485/RS-232 (can’t be used simultaneously) |
| COM 1 Connector | 2-pin screwed terminal block (DATA+, DATA-)
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND) |
| COM 2 | RS-485 (Self-turner inside) |
| COM 1 | RS-485/RS-232 (can’t be used simultaneously) |
| COM 2 Connector | 2-pin screwed terminal block (DATA+, DATA-) |
| Transmission Distance (m) | Depend on baud rate (for example, max. 1200 m at 9.6 kbps ) |
| Baud Rate (bps) | 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
| LED |
| Round LED | L1 LED, L2 LED, L3 LED |
| 5-digit 7 Segment | YES |
| Environment |
| Operating Temp. | -25 ~ 75° C |
| Storage Temp. | -40 ~ 80° C |
| Humidity | 5 ~ 95% RH, non-condensing |
| Power |
| Power supply | By USB interface. |
| Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption | 3 W |
| Mechanism |
| Dimensions | 72mm x 33mm x 122mm (W x L x H) |
