| Specifications |
| Hardware |
| CPU | 80186, 80 MHz or compatible |
| SRAM/Flash/EEPROM | 512 KB / 512 KB / 16 KB |
| Watchdog | Watchdog IC CPU built-in |
| ESD Protection | 4 kV class A |
| PROFIBUS Interface |
| Controller | Siemens SPC3 |
| Transceiver | ADI ADM2486 |
| Connector | 9-pin female D-Sub |
| Baud Rate (bps) | 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M |
| Transmission Distance (m) | Depend on baud rate (for example, max. 1200 m at 9.6 kbps ) |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
| Protocol | DP-V0 |
| UART Interface |
| COM | RS-232/RS-422/RS-485(can’t be used simultaneously) |
| COM Connector | 3-pin screwed terminal block (RxD, TxD, GND)
4-pin screwed terminal block (RxD+, RxD-, TxD+, TxD-)
2-pin screwed terminal block (DATA+, DATA-) |
| Baud Rate (bps) | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
| Data bit | 7, 8 |
| Stop bit | 1, 2 |
| Parity | None, Even, Odd |
| LED |
| LEDRound | LED PWR LED, RUN LED, ERR LED |
| Power |
| Power supply | Unregulated +10 ~ +30 VDC |
| Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption | 2.5 W |
| Mechanism |
| Installation | DIN-Rail |
| Dimensions | 72 mm x 33 mm x 119 mm (W x L x H) |
| Environment |
| Operating Temp. | -25 ~ 75°C |
| Storage Temp. | -30 ~ 85°C |
| Humidity | 5 ~ 95% RH, non-condensing |
