| GL100-N Main Unit Specifications |
| Number of channels: | Varies by the input module used, and measurement type is fixed with each input module |
| Output signal: | Alarm (1 channel), solid state switch with optical isolation (Optocoupler, Max. load is the 30 V, 50 mA) |
| Interface to PC: | USB (micro USB B type connector) |
| Storage device: | Built-in memory: RAM (Approx. 4.9 MB)
External memory: microSD memory card
* Maximum file size for captured data is 1.9MB. It is recommended to use the microSD memory card that supports sleep mode. (Example: TS4GUSDHC4, made by Transcend) |
| Display | LCD (backlit monochrome, graphical type 128 x 64 dots)
Contents: Captured data and Setting menu (Stored data is not able to replay. It is able to replay using the PC application software.) |
| Functions: | Real-time data capturing
Display the captured data value to the LCD in real-time and save the monitoring values
Set conditions using the Menu setting |
While using USB port:
Output captured data in real-time
Output the saved data from the internal memory
Full control of the GL100 from the PC application software |
| Alarm: | Action
Outputs the signal when the measuring data reaches the present conditions of alarm
Source
Level of measuring data
Detecting method
Condition: Higher or lower (signal is higher or lower than the threshold)
Combination: or |
| Trigger: | Action
Start or stop the recording of captured data by trigger
Source
Start trigger: OFF, Level (*), Alarm, or Date
Stop trigger: OFF, Level (*), Alarm
* Level trigger is available in the analog input of the GS-4VT, GS-4TSR, and GS-3AT module.
Detecting method of the Level (*)
Condition: Rising or Falling (signal is passed through the threshold)
Combination: OR or AND |
| Dustproof and waterproof: | IP54 compatible (*)
* It is effective only in the condition that the input module is set to the GL100 and then the covers of connector and battery are closed. It is recommended to replace the packing of cover in periodically. |
| Power source: | Alkaline battery (AA size x 2)
USB bus-power (5V, 200 mA) (*)
* When AC adapter for USB device is used, the required power capacity is 5V, 1A. Battery and AC adapter is not included. |
| Operating environment: | Temperature: -10 °C to 50 °C
Humidity: up to 80 % RH (non condensed) |
| External dimension [W x D x H]: | Approx. 66 x 100 x 27 mm (exclude protrusion |
| Weight: | GL100-N: Approx. 125 g |
| 4CH VOLTAGE / TEMPERATURE TERMINAL, GS-4VT |
| Type of measurement | Analog voltage or Temperature, Logic (signal pattern) or Pulse (instant or accumulated count) |
| Number of channel | Voltage/Temperature: 4 channels (measurement type for channels can each be separately selected)
Logic/pulse: 4 channels (measurement type for channels can be selected as set of 4 channels) |
| Input method of voltage/temp. | Scans by the photo-MOS-relay, all channels isolated input |
| Measuring range of voltage | 20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50 V F.S. and 1-5V F.S. |
| Measuring accuracy | 0.15 % of F.S. |
| Input impedance | 1 M ohms |
| Maximum input voltage | Between positive ("+") and negative ("-") input terminal: 60 V
Between negative ("-") terminal of channels: 60 V
Between negative ("-") terminal of channel and "GND": 60 V |
| Withstand voltage | Between negative ("-") terminal of channels: 350 V p-p (1 minute)
Between negative ("-") terminal of channel and "GND": 350 V p-p (1 minute) |
| Measuring range of temperature | Thermocouple: K type -200 °C to 1370 °C, T type -200 °C to 400 °C |
| Measuring accuracy | K type -200 = TS = -100 °C: ± (0.05% of reading + 2.0 °C)
-100 < TS = 1370 °C: ± (0.05% of reading + 1.0 °C)
T type -200 = TS = -100 °C: ± (0.1% of reading + 1.5 °C)
-100 < TS = 400 °C: ± (0.1% of reading + 0.5 °C)
Reference Junction Compensation (R.J.C.): ± 0.5 °C |
| Burnout checking | Displaying warning when Thermocouple has failed |
| Unit of temperature measurement | Switchable °C and °F |
| Input of Logic/Pulse | Input signal: Voltage or Dry contact signal
Voltage input: 0 to +24V (common ground)
Dry contact signal: Relay or Solid state relay
Threshold voltage: Approx. +2.5V
Hysteresis: Approx. 0.5V (Status of the signal is changed in the 2V and the 2.5V.) |
| Measuring rage of Pulse | Instant count: up to 200 counts/sampling interval
Accumulated count: up to 65535 counts (Accumulated value is reset by
starting the data recording or pressing the QUIT key.) |
| Sampling interval | 0.5, 1, 2, 5, 10, 20, 30 seconds, 1, 2, 5, 10, 20, 30, 60 minute |
| Length of cable | Approx. 200 mm |
| Operating environment | Temperature: -10 °C to 50 °C
Humidity: up to 80 % RH (non condensed) |
| External dimension [W x D x H] | Approx. 46 x 66 x 36 mm (exclude protrusion) |
| Weight | Approx. 85 g |
