| Item | Description |
Number of channels
Input method, Type of input terminal | Varies by the input module used, and measurement type is fixed with each input module |
| Output signal | the input module used, and measurement type is fixed with each input module |
| Interface to PC | USB (micro USB B type connector), Wireless LAN (WLAN) in GL100-WL |
| Wireless LAN (in GL100-WL) | Standards: IEEE802.11b, Communication distance: approx. 40 m
* It varies by the condition of the LAN. Real-time transfer rate is up to 500ms. The WLAN is able to disable. (It is enabled in the factory default setting) |
| Storage device | Built-in memory: RAM (Approx. 4.9 MB)
External memory: microSD memory card
* Maximum file size for captured data is 1.9MB. It is recommended to use the microSD memory card that supports sleep mode.
(Example: TS4GUSDHC4, made by Transcend) |
| Display | LCD (backlit monochrome, graphical type 128 x 64 dots)
Contents: Captured data and Setting menu (Stored data is not able to replay. It is able to replay using the PC application software.) |
| Functions | - Real-time data capturing
- Display the captured data value to the LCD in real-time and save the monitoring values
- Set conditions using the Menu setting
|
While using USB port:
- Output captured data in real-time
- Output the saved data from the internal memory
- Full control of the GL100 from the PC application software
|
While using Wireless LAN (in GL100-WL):
- Output the saved data from the internal memory
- Full control of the GL100 from the PC application software
- Simple control of the GL100 from the application software of Smart Device
- Send warnings via the e-mail
|
| Alarm | Action
Outputs the signal when the measuring data reaches the present conditions of alarm
Source
Level of measuring data
Detecting method
Condition: Higher or lower (signal is higher or lower than the threshold)
Combination: OR |
| Trigger | Action
Start or stop the recording of captured data by trigger
Source
Start trigger: OFF, Level (*), Alarm, or Date
stop trigger: OFF, Level (*), Alarm
* Level trigger is available in the analog input of the GS-4VT, GS-4TSR, and GS-3AT module.
Detecting method of the Level (*)
Condition: Rising or Falling (signal is passed through the threshold)
Combination: OR or AND |
| Dustproof and waterproof | IP54 compatible (*)
* It is effective only in the condition that the input module is set to the GL100 and then the covers of connector and battery are closed. It is recommended to replace the packing of cover in periodically. |
| Power source | • Alkaline battery (AA size x 2)
USB bus-power (5V, 200 mA) (*)
* When AC adapter for USB device is used, the required power capacity is 5V, 1A. Battery and AC adapter is not included. |
| Operating environment | Temperature: -10 °C to 50 °C
Humidity: up to 80 % RH (non condensed) |
| External dimension [W x D x H] | Approx. 66 x 100 x 27 mm (exclude protrusion) |
| Weight | GL100-N: Approx. 125 g, GL100-WL: Approx. 130 g |
| Item | Description |
| Type of measurement | Temperature, Logic (signal pattern) or Pulse (instant or accumulated count) |
| Number of channel | Temperature: 4 channels (measurement type for channels can each be separately selected)
Logic/pulse: 4 channels (measurement type for channels can be selected as set of 4 channels) |
| Input method of temperature | Scans by the photo-MOS-relay, all channels non-isolated input |
| Temperature sensor | Thermistor (optional) |
| Measuring range | Temperature: -40 to 120 °C (varies by the type of sensor)
(Sensor GS-103AT-4P: -40 to 105 °C, GS-103JT-4P: -40 to 120 °C) |
| Measuring accuracy | GL100 main body | -40 = TS < 0 °C: ± 0.7 °C
0 = TS = 35 °C: ± 0.2 °C
35 < TS = 70 °C: ± 0.4 °C
70 < TS = 120 °C: ± 1.0 °C |
| Thermistor sensor (GS-103AT-4P or GS-103JT-4P) | Typical ± 0.4 °C |
| Unit of temperature measurement | Switchable °C and °F |
| Input of Logic/Pulse | Input signal: Voltage or Dry contact signal
Voltage input: 0 to +24V (common ground)
Dry contact signal: Relay or Solid state relay
Threshold voltage: Approx. +2.5V, Hysteresis: Approx. 0.5V (Status of the signal is changed in the 2V and the 2.5V.) |
| Measuring rage of Pulse | Instant count: up to 200 counts/sampling interval
Accumulated count: up to 65535 counts (Accumulated value is
reset by starting the data recording or pressing the QUIT key.) |
| Sampling interval | 0.5, 1, 2, 5, 10, 20, 30 seconds, 1, 2, 5, 10, 20, 30, 60 minutes |
| Length of cable | Approx. 200 mm |
| Operating environment | Temperature: -10 °C to 50 °C
Humidity: up to 80 % RH (non condensed) |
| External dimension[W x D x H] | Approx. 46 x 66 x 36 mm (exclude protrusion) |
| Weight | Approx. 83g |
