| Specifications |
| SUPPLY VOLTAGE | 10 to 30 VDC
Polarity Protected |
| CURRENT REQUIREMENTS | 45mA (exclusive of load) |
| OUTPUT TRANSISTORS | (1) NPN and (1) PNP sensor output transistor
Sensor outputs can sink or source up to 150mA (current limited)
All outputs are continuously short circuit protected |
| REMOTE AUTOSET INPUT | Opto isolated sinking input (10mA) |
| RESPONSE TIME | Light/Dark state response = 300 microseconds |
| LED LIGHT SOURCE | Infrared = 880nm, Red = 660nm, Blue = 480nm, White = Broadband Color Spectrum
Pulse modulated |
| PUSHBUTTON CONTROL | Yellow/Blue – AUTOSET
Manual Adjustments
Set status of three options: 5) Lock, 4) Auto-Trac, 3) Timers: 10ms, 25ms, 50ms |
| HYSTERESIS | “Factory-set” for high resolution – less than one bar on the Contrast Indicator |
| LIGHT IMMUNITY | Responds to sensor’s pulsed modulated light source, resulting in high immunity to most ambient light, including indirect sunlight or strobes |
| DIAGNOSTIC INDICATORS | 5-LED bar graph functions in one of two modes:
1. Contrast Indicator – displays scaled reading of sensor’s response to contrasting light levels (light to dark)
2. Status Indicator – Displays status of 5 selectable options
Red LED output indicator = Illuminates when the sensor’s output transistors are “on.” NOTE: If Output LED flashes, a short circuit condition exists
Amber LED = lluminates when in the options select mode
Yellow LED = Illuminates when action alert is activated. Also indicates when ACT adjusts sensor |
| AMBIENT TEMPERATURE | -40°C to 70°C (-40°F to 158°F) |
| RUGGED CONSTRUCTION | Chemical resistant, high impact polycarbonate housing
Waterproof ratings: NEMA 4X, 6P and IP67
Conforms to he |
