Specifications |
Digital input/output |
Digital type | 5 V TTL input / CMOS output |
Number of I/O | 4, configured as 3 ports of 8 bits each (Port 0, Port 1, Port 2) |
Configuration | ach bit can be independently configured for input or output |
Pull-up configuration | Each port has 47 k? resistors configurable as pull-up (default) or pull-down via internal jumpers W3 (port 1), W4 (port 2), and W5 (port 0). |
Digital I/O transfer rate (system-paced) | 100 to 5000 reads/writes per second, typical, on a local network |
Alarm functionality | Any combination of DIO bits may be configured to become outputs and go to defined values when an Ethernet connection with a host is established or lost. |
Power on and reset state | All bits are input unless the alarm functionality is enabled for them. |
Input high voltage threshold | 2.0 V min |
Input high voltage limit | 5.5 V absolute max |
Input low voltage threshold | 0.8 V max |
Input low voltage limit | –0.5 V absolute min 0 V recommended min |
Output high voltage | 4.4 V min (IOH = –50 µA) 3.76 V min (IOH = –24 mA) |
Output low voltage | 0.1 V max (IOL = 50 µA) 0.44 V max (IOL = 24 mA) |
Counter |
Pin name | P2D7 (shared with digital I/O) |
Counter type | Event counter |
Number of channels | 1 |
Input type | Schmitt trigger; uses port 2 digital I/O pull-up/down selection. |
Resolution | 32 bits |
Schmitt trigger hysteresis | 1.01 V typ 0.6 V min 1.5 V max |
Input high voltage threshold 2.43 V type | 1.9 V min 3.1 V max |
Input high voltage limit | 5.5 V absolute max |
Input low voltage threshold | 1.42 V typ 1.0 V min 2.0 V max |
Input low voltage limit | –0.5 V absolute min 0 V recommended min |
Input frequency | 10 MHz max |
High pulse width | 50 ns min |
Low pulse width | 50 ns min |
Memory |
Non-volatile memory | 4,096 bytes (272 bytes for settings, 3,824 bytes for user) |
Power |
External power supply 5 V ±5% required | 5 V, 1 A supply provided (PS-5V1AEPS) Supply current Quiescent current 160 mA typical |
Supply current | Quiescent current 160 mA typical 840 mA max, including all external loading |
User output voltage range | Available at +VO terminal 4.40 V min to 5.25 V max; assumes supplied AC adapter is used |
User output current | Available at +VO terminal 10 mA max |
Environmental |
Operating temperature range | 0 °C to 55 °C max |
Storage temperature range | –40 °C to 85 °C max |
Humidity | 0% to 90% non-condensing max |
Mechanical |
Dimensions (L × W × H) | 117.9 × 82.8 × 29.0 mm (4.64 × 3.26 × 1.14 in.) |