Technical specifications |
Hardware |
CPU | 512 KB / 512 KB / 16 KB |
NVRAM | 31 bytes (battery backup, data valid for up to 10 years) |
RTC (Real Time Clock) | Yes |
Watchdog | Watchdog IC |
Expansion Slot | 4 slots |
CAN Interface |
Controller | NXP SJA1000T with 16 MHz clock |
Transceiver | NXP 82C250 |
Channel number | 1 |
Connector | 5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others) |
Baud Rate (bps) | 125 k, 250 k, 500 k |
Transmission Distance (m) | Depend on baud rate (for example, max. 500 m at 125 kbps ) |
Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor | Jumper for 120 O terminator resistor |
Specification | ISO-11898-2, CAN 2.0 |
Protocol | DeviceNet Volumn I ver2.0, Volumn II ver2.0 Predefined Master/Slave Connection set |
UART Interface |
COM 1 | RS-232 (For configuration) |
COM 1 Connector | 9-pin male D-Sub (DTE: RxD, TxD, RTS, CTS, DTR, DSR, RI, GND) |
LED |
Round LED | PWR LED, NET LED, MOD LED |
Power |
Power Supply | Unregulated +10 ~ +30 VDC |
Protection | Power reverse polarity protection, Over-voltage brown-out protection |
Power Consumption | 2.5 W |
Mechanism |
Installation | DIN-Rail |
Dimensions | 188mm x 132mm x 91mm (W x L x H) |
Environmental |
Operating Temperature | -25 ~ 75°C |
Storage Temperature | -30 ~ 80 °C |
Operating Humidity | 10 ~ 90% RH, non-condensing |