| Technical data |
|
| DeviceNet Interface |
| DeviceNet Specification | Volume I, Release 2.0 & Volume II, Release 2.0, Errata5 |
| DeviceNet subscribe | Group 2 Only Server |
| Connection supported | 1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O
Baud Rate |
| Setting by Rotary Switch | 125 kbps, 250 kbps, 500 kbps |
| Node ID Setting by Rotary Switch | 0 ~ 63 |
| Heartbeat message | Yes |
| Shutdown message | Yes |
| Terminal Resistor | Switch for 120 O terminal resistor |
| Connector | 5-pin screwed terminal block
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
| EDS file | Yes |
| LED | PWR/NET/MOD |
| PWM |
| Channels | 8 (Source) |
| Output Max. Load Current | 1 mA |
| Frequency | 0.2 ~ 500 kHz (non-continuous) |
| Scaling Resolution | 16-bit (1 ~ 128 µs for each step) |
| Duty Cycle | 0.1 ~ 99.9 % |
| PWM Mode | Burst mode, Continuous mode |
| Burst mode counter | 1~65535 counts |
| Trigger Mode | Hardware (Start and Stop) or Software (Start and Stop) |
| Intra-module Isolation | 3750 Vrms |
| ESD Protection | 4 kV Contact for each channel |
| Digital Input |
| Channels | 8 (Sink/Source) |
| ON Voltage Level | +5.5 ~ +30 V |
| OFF Voltage Level | <3.5 V |
| Counter Frequency | 500 kHz max. |
| Max. Counts | 32-bits (4,294,967,295) |
| Input Impedance | 4.7 kO, 1/4 W |
| Intra-module Isolation | 3750 Vrms |
| ESD Protection | 4 kV Contact for each channel |
| LED |
| DeviceNet Status | 3 LEDs for PWR/NET/MOD |
| Terminal Resister | 1 LED as Terminal Resister indicators |
| PWM LED | 8 LEDs as PWM Output indicators |
| DI LED | 8 LEDs as Digital Input indicators |
| Power |
| Power Supply | Unregulated +10 ~ +30 VDC |
| Power Consumption | 2 W |
| Mechanism |
| Installation | DIN-Rail |
| Dimensions | 32.3 mm x 99 mm x 77.5 mm ( W x L x H ) |
| Environment |
| Operating Temp. | -25 ~ +75°C |
| Storage Temp. | -30 ~ +80°C |
| Humidity | 10 ~ 90% RH, non-condensing |
