| Technical data |
| General |
| Standard |
EN61010-1
EN61010-2-201
EN61131-2 |
| Dimensions (W × H × D) |
72x90x62mm |
| Weight |
240g |
| Mounting |
Top hat rail EN50022, 35mm |
| Environmental conditions, Indoor use only |
| Operating ambient temperature |
0°C – 55°C |
| Relative humidity – non-condensing |
80 % for temp. up to 31 °C, decreasing linearly to 50 % relative humidity at 55 °C |
| Pollution Degree |
PD2 |
| Altitude |
up to 2000m AMSL |
Vibration (5 = f = 9 Hz)
Vibration (9 = f = 150 Hz) |
1,75 mm amplitude sinus
3,5 mm amplitude random
0,5 g acceleration sinus
1,0 g acceleration random |
| Transport and Storage |
-20°C – +70°C
10 to 90% no condensation
Altitude 3000m AMSL |
| Shock response |
15g, 11ms half sinus all 3 axes |
| I/O |
| Supply voltage |
12V or 24V |
| USB (Power for programming only) |
USB-B, 2.0 |
| Ethernet |
RJ45, 10/100Mbps |
| RS485 (no termination inside) |
250kb |
Inputs, no galvanic insulation
Common analog/digital
Fixed digital, ext. Interrupt usable |
12
10
2 |
Digital Outputs, no galvanic insulation
Relay output |
12
10 |
PIN Header, no Galvanic insulation
Logic level Input
Logic level Output
Communication
Internal Power |
12 parallel to terminal Inputs
12 parallel to terminal Outputs
SPI, 2xUART, I2C, Reset
+3,3V, +5V, ARef, GND |
| Terminal capacities |
Relay Output, Power Input
Strip length
Max. tightening torque |
2,5mm² (24-12AWG)
6-7mm
0,5Nm |
Digital, Analog Input Output
Strip length
Max. tightening torque |
1,5mm² (30-16AWG)
5-6mm
0,2Nm |
| Pin header connector |
2x 26 Pin, Dual row, 2.54 pitch |
| Protection |
| ESD HBM Class 0 |
Contact discharge: ±4kV
Air discharge: ±8kV |
| Supply input over current protection |
Internal Fuse 20A (fast) |
| Relay Output |
External Fuse required |
| Digital Output |
Overload, short circuit, ESD |
| Signal Input |
Overvoltage, ESD |
Pin header connector
Current +5V, +3,3V |
ESD
total 200mA, resettable fuse |
